Shielded LAN Cable CAT7A 1000MHz 23AWG — LSZH Yellow, 10Gbps-Ready
Product Description:
ITI-LINK CAT7A SFTP Cable — shielded LAN cable engineered for mission-critical networks. 50m reel, 23AWG solid copper, LSZH jacket, 1000MHz bandwidth. Perfect for data centers, 5G sites and industrial networks needing robust 10Gbps performance.
① Overview: ITI-LINK introduces the ITI-CTSF7A-017 CAT7A SFTP Cable — purpose-built for industrial and data center use. This shielded LAN cable combines high bandwidth with robust shielding for stable, secure connections.
② Performance: Operating up to 1000MHz, the cable supports heavy data loads and low-latency applications. 23AWG solid copper conductors reduce signal loss and maintain consistent 10Gbps-class throughput under load.
③ Structure & Materials: The SFTP design (foil + braid) provides dual-layer shielding to guard against crosstalk and external interference. The LSZH jacket minimizes toxic smoke in fire scenarios; PVC/PE variants provide additional abrasion resistance. The yellow color provides quick visual identification in dense cable bundles.
④ Application Value: This Data Center Cable and Industrial Network Cable reduces packet loss and improves uptime in high-EMI environments like manufacturing floors or power substations. The wooden reel packaging speeds installation and protects the cable during transport.
⑤ Brand Trust: Backed by ITI-LINK’s quality control and test procedures, ITI-CTSF7A-017 ensures dependable performance for enterprise networks, 5G deployments, and mission-critical infrastructures.
Technical Parameters:
| Product Description:Shielded LAN Cable CAT7A 1000MHz 23AWG — LSZH Yellow, 10Gbps-Ready |
| Rev.: A | ECN Description: |
| Construction Item Description | Electrical Property |
|
Conductor |
Material | Bare Solid Copper(elongation: 19-24%) | Conductor Resistance at 20°C | ≤ 9.5 Ω / 100m |
| OD | 23AWG | Resistance unbalance within a pair | ≤ 2% |
|
Insulation | Material | PE Skin-Foam-Skin | Insulation Resistance at 20°C after 2min of electrification under a DC voltage between 100 & 500V |
>1500 MΩ / 100m |
| OD | 1.45 ±0.01 mm | Mutual capacitance | 5600 pF / 100m MAX |
| Average THK | 0.42 mm | Capacitance unbalance pair to ground at 800Hz or 1 kHz | ≤ 160 pF / 100m |
|
Color | 1p: white + 2 blue stripes & blue | Characteristic impedance at 100MHz | 100 ± 15 Ω |
| 2p: white + 2 orange stripes & orange | Dielectric Strength Test Voltage (cd/cd,cd/screen): 1.00KV DC or 0.7 KV AC for 1 min |
No breakdown |
| 3p: white + 2 green stripes & green | Mechanical Property |
| 4p: white + 2 brown stripes & brown |
insulation | elongation before aging | ≥ 300% |
|
Pair Twist |
Lay & Direction | 1p: S=19.0 mm (28%) | tensile strength before aging | ≥12 MPa |
| 2p: S=23.5 mm (31%) | elongation after aging | ≥ 150 % |
| 3p: S=21.5 mm (33%) | tensile strength after aging | ≥10.5 MPa |
| 4p: S=25.0 mm (36%) |
jacket | elongation before aging | ≥ 125 % |
| OD | / | tensile strength before aging | ≥ 10 MPa |
|
Inner Assemble | Lay | S=90 ± 5 mm | elongation after aging | ≥ 100 % |
| Direction | according to the drawing | tensile strength after aging | ≥ 8 MPa |
| OD | / | Packing |
|
Filler | Ripcord | / | Drum | NA |
| Drain Wire | / |
|
|
|
Pair Shield | Shield | Pair Shield |
|
| Construction | / |
| Material | Polyester/Aluminium (PET/ALU) |
| Coverage | ≥ 115% |
|
Braid | Material | ɸ 0.12mm Aluminum-magnesium braidedr |
| Coverage | ≥ 40% |
|
Jacket | Material | LSZH, 60P, -20~75℃ |
| Hardness | 81± 3 |
| OD | 8.5 ± 0.2 |
| Average THK | 0.60 ~ 0.70 |
|
Color | Blue |
| Marking Color | black |
| Marking | according to the customer's requirements |
| Electrical Properties |
| Conductor Resistance at 20°C | NF EN 50289-1-2 / IEC 60189-1 | ≤ 9.5 Ω / 100m |
| Resistance unbalance within a pair | NF EN 50289-1-2/ IEC 60708 | ≤ 2% |
| Dielectric Strength Test Voltage (cd/cd): 1.00KV DC or 0.7 KV AC for 1 min Test Voltage (cd/screen): 1.00KV DC or 0.7 KV AC for 1 min |
NF EN 50289-1-3 / IEC 61196-1-105 |
No breakdown |
| Insulation Resistance at 20°C after 2min of electrification under a DC voltage between 100 & 500V |
NF EN 50289-1-4 / IEC 60885-1 | >1500 MΩ / 100m |
| Mutual capacitance | NF EN 50289-1-5 /IEC 60189-1 | 5600pF / 100m MAX |
| Capacitance unbalance pair to ground at 800Hz or 1 kHz | NF EN 50289-1-5 / IEC 60189-1 | ≤ 160 pF / 100m |
| Characteristic impedance at 100MHz | NF EN 50289-1-11/ IEC 61156-1 | 100 ± 15 Ω |
| Spark Test | UL444 | 2000 ± 250VOC |
Applications:
Industrial network backbones, factory automation (PLC/SCADA links), 5G base station backhaul, and power distribution control rooms where strong EMI protection and LSZH safety are essential.
